Puri Aerosphere · Sector 111

Puri Aerosphere Specifications

What is confirmed about the building, and what to get in writing before you book.

Artistic Impression
Confirmed

What the Published Material States

Taken from the developer's material and the published Phase 1 plans.

CertificationLEED pre-certified
Air conditioningCentral
Lift lobbyDouble height
Office corridor2.4 m wide
Retail corridor1.8 m service corridor
Typical module5.175 m x 12.345 m
Typical carpet715 sq.ft.
ParkingMulti-level
Not Yet Published

Ask for These in Writing

A detailed specification for Aerosphere has not been released. These are the points that decide whether an office floor works for you. Ask for each one in the specification annexure to the agreement.

Decides ceiling height after false ceiling and ducting. Ask for the figure in metres.

The live load per square metre the slab is designed for. Matters for server rooms, archives and dense seating.

Central air conditioning is confirmed. The system type, the hours it runs and how after-hours use is billed are not.

Sanctioned load per unit or per sq.ft., and the share of that load covered by DG back-up.

The plans show the lift bank. Ask for the rated speed and the number of lifts serving each floor.

Car spaces per 1,000 sq.ft. of office. Visitor parking is usually counted separately.

Glass performance values (solar heat gain, light transmission) affect cooling cost on the west face.

Sprinkler coverage, fire lifts and refuge areas, as per the approved fire scheme.

Design Team

Who Is Responsible for What

Architecture

ARCOP Associates

Master planning and architecture - the three-tower massing, the stepped terraces that form the green spine and the podium along the expressway.

MEP & Building Engineering

AEON Integrated Building Design Consultants

Mechanical, electrical and plumbing design, including the central air-conditioning system and the services cores.

Landscape

Design Cell

Planting on the terraces and the ground-level landscape along the plaza and the drop-off.

Structural Engineering

Planning and Design Bureau

Structural design of the towers and the podium.

Facade

Facade Design Factor

The glazed curtain wall and the framing around the terrace cut-outs.

Proof Design Consultant

IIT Roorkee

Independent proof-checking of the structural design.

Puri Aerosphere · Dwarka Expressway

Visit the Site in Sector 111

See the location on the expressway, go through the published floor plates with our team and take away the cost sheet for the size you need.

Call +91 93553 02055
Artistic Impression
WhatsAppChat with us